Silver aluminum conductive particle filled adhesive sealants are a one part, electrically conductive, room-temperature-curing elastomer. They are supplied as a readily extrudable paste that cures rapidly when exposed to atmospheric moisture. When completely cured, these conductive adhesives are highly resilient elastomers that exhibit superior adhesion to a variety of substrates as well as low volume resistivity. https://ja-bar.com/index.php?id=series-000-conductive-adhesives
• Electrically conductive
• Thixotropic paste
• Excellent adhesion to various substrates
• One part — no mixing
• Fluorosilicone options available
Surfaces to be bonded must be clean, dry and oil free. Typical solvents used to clean substrates are acetone, methyl ethyl ketone, xylene and isopropyl alcohol. Apply adhesives directly from their package to the desired area. If this product is to be used as a sealant, it should be applied liberally to the interface. It is important to force adhesives into the material being bonded as much as possible. If maximum adhesion and RFI shielding are desired, apply weight to the sealed interface during cure. An appropriate primer is also available for difficult bonding substrates.
SAFETY AND HANDLING INFORMATION
WARNING: Contact with adhesives is irritating to skin and eyes. If contact is made with the skin, the excess should be wiped off with a dry cloth or paper towel followed by a waterless hand cleaner such as the type used to clean grease or oil from the skin. For specific information regarding safety and handling of this product refer to the Safety Data Sheet.
CLEAN UP: Uncured adhesives may be removed from a surface with xylene or acetone.
STORAGE INFORMATION: Shelf life of adhesives are one (1) year from date of shipment provided the products are stored in the dry, tightly sealed, original container below 23ºC (73.4ºF).
ORDERING INFORMATION: Special packaging available upon request.
|Lap Shear Strength|
|Skin Over (MIN)||15|
|Tack Free (MIN)||90|
|Cure for Handling (HRS)||12 - 24|
|Full Cure (HRS)||72 - 144|
|Durometer Shore A||68|
|Elongation % (MIN)||155|