Nickel Graphite Conductive Adhesive – 10.3 fluid oz.

$250.00

Nickel graphite conductive particle filled adhesive sealants are a one part, electrically conductive, room-temperature-curing elastomer.

Bulk Discounts
5-9$191.42
10-24$172.52
25-49$161.02
50-99$136.42
100-249$125.92
250+$123.41

Description

Print Friendly, PDF & Email

Nickel graphite conductive particle filled adhesive sealants are a one part, electrically conductive, room-temperature-curing elastomer. They are supplied as a readily extrudable paste that cures rapidly when exposed to atmospheric moisture. When completely cured, these conductive adhesives are highly resilient elastomers that exhibit superior adhesion to a variety of substrates as well as low volume resistivity.

FEATURES
• Electrically conductive
• Thixotropic paste
• Non-corrosive
• Excellent adhesion to various substrates
• One part — no mixing
• Fluorosilicone options available

Surfaces to be bonded must be clean, dry and oil free. Typical solvents used to clean substrates are acetone, methyl ethyl ketone, xylene and isopropyl alcohol. Apply adhesives directly from their package to the desired area. If this product is to be used as a sealant, it should be applied liberally to the interface. It is important to force adhesives into the material being bonded as much as possible. If maximum adhesion and RFI shielding are desired, apply weight to the sealed interface during cure. An appropriate primer is also available for difficult bonding substrates.

SAFETY AND HANDLING INFORMATION
WARNING: Contact with adhesives is irritating to skin and eyes. If contact is made with the skin, the excess should be wiped off with a dry cloth or paper towel followed by a waterless hand cleaner such as the type used to clean grease or oil from the skin. For specific information regarding safety and handling of this product refer to the Safety Data Sheet.
CLEAN UP: Uncured adhesives may be removed from a surface with xylene or acetone.
STORAGE INFORMATION: Shelf life of adhesives are one (1) year from date of shipment provided the products are stored in the dry, tightly sealed, original container below 23ºC (73.4ºF).
ORDERING INFORMATION: Special packaging available upon request.

 020
Nickel
Graphite
Specific Gravity2.29
Consistencythick paste
Lap Shear Strength
Minimum (PSI)
150
Operating Temp.
Range (ºF)
-55 /+400
Skin Over (MIN)15
Tack Free (MIN)90
Cure for Handling (HRS)12 - 24
Full Cure (HRS)72 - 144
Colordark gray
Durometer Shore A65
Tensile Strength
PSI (MIN)
540
Elongation % (MIN)210
Tear Strength
#/IN (MIN)
90
Volume Resistivity
OHM-CM
.06

Product Data Sheet

Safety Data Sheet

Additional information

Weight0.64375 lbs