Description
Silver-plated, aluminum-filled fluorosilicone capable of 90 dB of plane wave shielding effectiveness at 10 GHz with a continuous use temperature range of -55°C to +160°C and resistant to solvents and jet fuels. https://ja-bar.com/index.php?id=series-800-conductive-particle-filled-elastomers
Diameter: .125
M83528 Dash: 1/009
| Series | U of M | 815 |
|---|---|---|
| Filler | — | AG/Al |
| Elastomer | — | Fluorosilicone |
| MIL-83528 TYPE | — | D |
| Operating Temp. (ºC ) | Min | -55 |
| Max | +160 | |
| Hardness | Shore A | 70 |
| Specific Gravity | g/cc | 2.0 |
| Compression Deflection | % min | 3.5 |
| Tensile Strength | #/in sq | 180 |
| Elongation | Min- | 60 |
| Max- | 260 | |
| Compression Set | % | 30 |
| Tear Strength | #/in | 35 |
| Volume Res. | Ohm-cm | .012 |
| Shielding Effectiveness as tested per Mil-DTL-83528 | 100 MHz | 120 |
| 2 GHz | 115 | |
| 10 GHz | 115 | |
| Material D Characteristics | ||||
|---|---|---|---|---|
| Item No. | Inspection | Units | Tolerance | Material |
| D | ||||
| 1. | Operating Temperature Range | °C | N/A | -55 |
| +160 | ||||
| 2. | Specific Gravity | Sp gr | ±13% | 2.0 |
| 23/23°C | ||||
| 3. | Hardness | Shore A Units | ±7 | 70 |
| 4. | Compression / Deflection | Percent | Min | 3.5 |
| 5. | Tensile Strength | Pounds per Square Inch | Min | 180 |
| 6. | Elongation | Percent | Min | 60 |
| Max | 260 | |||
| 7. | Compression Set | Percent | Max | 30 |
| 8. | Tear Strength | Pounds per Inch | Min | 35 |
| 9. | Volume Resistivity as Received | Ohm-cm | Max | 0.012 |
| 10. | Sheilding Effectiveness | dB | Min | 90 |
| 20 MHz - 10 GHz (E-Field) | ||||
| 11. | Electrical Stability During | Ohm-cm | Max | 0.015 |
| During Vibration After | 0.012 | |||
| 12. | Electrical Stability After Break | Ohm-cm | Max | 0.015 |
| 13. | Low Temperature Flex TR10 | °C | Max | -55 |
| TR70 | -40 | |||
| 14. | Volume Resistivity | Ohm-cm | Max | 0.015 |
| (after life testing) | ||||
| 15. | Volume Resistivity After | Ohm-cm | Max | 0.015 |
| Electromagnetic Pulse | ||||
| (EMP) exposure 2/ | ||||
| 16. | Fluid Immersion 3/ 4/ | -- | -- | SUR |
| 1/ Tolerance on material G only is ±0.75 sp gr 23/23 °C | ||||
| 2/ 0.9 Ka per linear inch of perimeter | ||||
| 3/ 4/ Maximum volume swell of 25 percent and maximum change in hardness of 15 shore A units | ||||
| N/S = Non survivable; SUR = Survivable | ||||
Reviews
There are no reviews yet.