Description
Silver-plated, copper-filled silicone capable of 110 dB of plane wave shielding effectiveness at
10 GHz with a continuous use temperature range of -55°C to +125°C.
Diameter: .125
M83528 Dash: 1/009
| Performance Characteristics Material A | ||
|---|---|---|
| Series | U of M | 806 |
| Filler | — | Silver Copper |
| Elastomer | — | Silicone |
| MIL-83528 TYPE | — | A |
| Operating Temp. (ºC ) | Min | -55 |
| Max | +125 | |
| Hardness | Shore A | 65 |
| Specific Gravity | g/cc | 3.5 |
| Compression Deflection | % min | 3.5 |
| Tensile Strength | #/in sq | 200 |
| Elongation | Min- | 100 |
| Max- | 300 | |
| Compression Set | % | 32 |
| Tear Strength | #/in | 25 |
| Volume Res. | Ohm-cm | .004 |
| Shielding Effectiveness as tested per Mil-DTL-83528 | 100 MHz | 120 |
| 500 MHz | 120 | |
| 2 GHz | 120 | |
| 10 GHz | 120 | |
| Material A Characteristics | ||||
|---|---|---|---|---|
| Item No. | Inspection | Units | Tolerance | Material |
| A | ||||
| 1. | Operating Temperature Range | °C | N/A | -55 |
| +125 | ||||
| 2. | Specific Gravity | Sp gr | ±13% | 3.5 |
| 23/23°C | ||||
| 3. | Hardness | Shore A Units | ±7 | 65 |
| 4. | Compression / Deflection | Percent | Min | 3.5 |
| 5. | Tensile Strength | Pounds per Square Inch | Min | 200 |
| 6. | Elongation | Percent | Min | 100 |
| Max | 300 | |||
| 7. | Compression Set | Percent | Max | 32 |
| 8. | Tear Strength | Pounds per Inch | Min | 25 |
| 9. | Volume Resistivity as Received | Ohm-cm | Max | 0.004 |
| 10. | Sheilding Effectiveness | dB | Min | 110 |
| 20 MHz - 10 GHz (E-Field) | ||||
| 11. | Electrical Stability During | Ohm-cm | Max | 0.006 |
| During Vibration After | 0.004 | |||
| 12. | Electrical Stability After Break | Ohm-cm | Max | 0.008 |
| 13. | Low Temperature Flex TR10 | °C | Max | -55 |
| TR70 | -55 | |||
| 14. | Volume Resistivity | Ohm-cm | Max | 0.01 |
| (after life testing) | ||||
| 15. | Volume Resistivity After | Ohm-cm | Max | 0.01 |
| Electromagnetic Pulse | ||||
| (EMP) exposure 2/ | ||||
| 16. | Fluid Immersion 3/ 4/ | -- | -- | N/S |
| 1/ Tolerance on material G only is ±0.75 sp gr 23/23 °C | ||||
| 2/ 0.9 Ka per linear inch of perimeter | ||||
| 3/ 4/ Maximum volume swell of 25 percent and maximum change in hardness of 15 shore A units | ||||
| N/S = Non survivable; SUR = Survivable | ||||
Reviews
There are no reviews yet.