Print Friendly, PDF & Email

conductive GASKETS

We carry the most commonly required connector gaskets for the military and commercial markets.
Sizes to fit every application. Custom sizes available upon request.
All gaskets are die cut and available in four different conductive materials.
The standard gasket thickness is .032 inches +- .005 inches.


MATERIAL A
Silver-plated, copper-filled silicone capable of 110 dB of plane wave shielding effectiveness at 10 GHz with a continuous use temperature range of -55°C to +125°C.

MATERIAL B
Silver-plated, aluminum-filled silicone capable of 100 dB of plane wave shielding effectiveness at 10 GHz with a continuous use temperature range of -55°C to +160°C.

MATERIAL C
Silver-plated, copper-filled fluorosilicone capable of 110 dB of plane wave shielding effectiveness at 10 GHz  with a continuous use temperature range of -55°C to +125°C and resistant to solvents and jet fuels.

MATERIAL D
Silver-plated, aluminum-filled fluorosilicone capable of 90 dB of plane wave shielding effectiveness at 10 GHz, with a continuous use temperature range of -55°C to +160°C and resistant to solvents and jet fuels.

Part or Identifying Number (PIN).
PINs to be used for gaskets acquired to this specification are created as follows:
M83528/001C005
Military DesignationGeneral Specification NumberSpecification Sheet NumberMaterial TypeDash Number
DIMENSIONS 2/ 
PIN NUMBER 1/National Stock NumberABCDConnector Shell SizeCross Section (cm2) 3/
± .010+ .020 – .0000.0150.01
001----------------------.469 (11.91 mm).375 (9.53 mm).738 (18.75 mm).141 (3.58 mm)60.037
0025999-01-583-2886.594 (15.09 mm).630 (16.00 mm).840 (21.34 mm).135 (3.43 mm)80.022
0035999-01-360-1165.594 (15.09 mm).568 (14.43 mm).812 (20.62 mm).125 (3.18 mm)80.025
0045999-01-382-4767.594 (15.09 mm).500 (12.70 mm).875 (22.22 mm).156 (3.96 mm)80.039
0055999-01-378-9138.719 (18.26 mm).750 (19.05 mm).965 (24.61 mm).135 (3.43 mm)9100.022
0065999-01-444-8968.719 (18.26 mm).680 (17.27 mm).937 (23.80 mm).125 (3.18 mm)100.027
007----------------------.719 (18.26 mm).625 (15.88 mm)1.000 (25.40 mm).156 (3.96 mm)10S,SL0.039
0085999-01-411-0284.812 (20.62 mm).875 (22.23 mm)1.060 (26.92 mm).141 (3.58 mm)1,120.019
009----------------------.813 (20.65 mm).750 (22.10 mm)1.094 (27.79 mm).141 (3.58 mm)12,12S,SL0.036
0105999-01-369-6395.906 (23.01 mm)1.005 (25.53 mm)1.153 (29.29 mm).135 (3.43 mm)13,140.015
0115999-01-507-0582.906 (23.01 mm).938 (23.83 mm)1.125 (28.58 mm).125 (3.18 mm)140.019
0125999-01-333-4235.906 (23.01 mm).875 (22.23 mm)1.188 (30.18 mm).156 (3.96 mm)14,14S0.032
0135999-01-365-9946.969 (24.61 mm)1.135 (28.83 mm)1.258 (31.95 mm).156 (3.96 mm)15,160.013
0145999-01-323-3804.969 (24.61 mm)1.063 (27.00 mm)1.250 (31.75 mm).125 (3.18 mm)160.019
0155999-01-382-4934.969 (24.61 mm)1.000 (25.40 mm)1.281 (32.54 mm).156 (3.96 mm)16,16S0.029
0165999-01-365-99441.062 (26.97 mm)1.260 (32.00 mm)1.351 (34.32 mm).156 (3.96 mm)17,180.009
0175999-01-519-07881.062 (26.97 mm)1.189 (30.20 mm)1.343 (34.11 mm).125 (3.18 mm)180.016
0185999-01-390-06361.062 (26.97 mm)1.135 (28.83 mm)1.375 (34.93 mm).156 (3.96 mm)18,18S0.025
0195999-01-380-30771.156 (29.36 mm)1.375 (34.93 mm)1.500 (38.10 mm).141 (3.58 mm)19, 200.013
0205999-01-323-38051.156 (29.36 mm)1.312 (33.32 mm)1.467 (37.26 mm).125 (3.18 mm)200.016
0215999-01-385-10841.156 (29.36 mm)1.250 (31.75 mm)1.500 (38.10 mm).172 (4.37 mm)200.016
0225999-01-365-99451.250 (31.75 mm)1.500 (38.10 mm)1.625(41.28 mm).141 (3.58 mm)21, 220.026
0235999-01-382-33841.250 (31.75 mm)1.437 (36.50 mm)1.562 (39.67 mm).125 (3.18 mm)220.013
0245999-01-512-86781.250 (31.75 mm)1.375 (34.93 mm)1.625 (41.28 mm).172 (4.37 mm)220.013
0255999-01-380-32191.375 (34.93 mm)1.625 (41.28 mm)1.750 (44.45 mm).172 (4.37 mm)23, 240.026
0265999-01-519-07871.375 (34.93 mm)1.563 (39.70 mm)1.703 (43.26 mm).152 (3.86 mm)240.013
0275999-01-393-72381.375 (34.93 mm)1.500 (38.10 mm)1.750 (44.45 mm).203 (5.16 mm)240.015
0285999-01-391-12151.500 (38.10 mm)1.750 (44.45 mm)1.875 (47.63 mm).172 (4.37 mm)250.016
0295999-01-467-75181.562 (39.67 mm)1.750 (44.45 mm)2.000 (50.80 mm).203 (5.16 mm)280.013
0305999-01-453-77981.750 (44.45 mm)2.000 (50.80 mm)2.250 (57.15 mm).219 (5.56 mm)320.026
0315999-01-413-69601.938 (49.23 mm)2.250 (57.15 mm)2.500 (63.50 mm).219 (5.56 mm)360.026
0325999-01-497-19992.188 (55.58 mm)2.500 (63.50 mm)2.750 (69.85 mm).219 (5.56 mm)400.026
033----------------------2.375 (60.33 mm)2.781 (70.63 mm)3.000 (76.20 mm).219 (5.56 mm)440.023
034----------------------2.625 (66.68 mm)3.031 (76.99 mm)3.250 (82.55 mm).219 (5.56 mm)480.023
035----------------------.500 (12.70 mm).437 (11.10 mm).800 (20.32 mm).135 (3.43 mm)4/0.037
0365999-01-566-1402.500 (12.70 mm).437 (11.10 mm).687 (17.45 mm).135 (3.43 mm)4/0.026
1/ “X” in the PIN shall be replaced by the applicable material type. Complete PIN example: M83528/004A001.

2/ Dimensions are in inches; metric equivalents are given in parenthesis and are for general information only.

3/ For calculation of volume resistivity (for reference only).

4/ Connector shell size data available for -035 and -036.

 

conductive SHEETS

We carry 15×20 QPL sheets.
 Sheet thickness is 0.02, 0.032, and 0.062.
25 Sheets or Less Ship Within Two Business Days, Remainder Within Two Weeks.
Alternative Sheet Sizes and Thicknesses Available with Two Weeks Lead Time.

 

 

 

 

 

 

 

 

Contact Product Engineering and Support for a quote if you need an alternative sheet size or material.

ALTERNATIVE SHEETS SIZES & THICKNESSES
(available upon request with two weeks lead time)
PART NO.THICKNESSSHEET SIZETOLERANCE
01010.0210 x 10+/- .004
01020.03210 x 10+/- .004
01030.06210 x 10+/- .005
01040.09310 x 10+/- .007
01050.12510 x 10+/- .010
01060.0212 x 12+/- .004
01070.03212 x 12+/- .004
01080.06212 x 12+/- .005
01090.09312 x 12+/- .007
01100.12512 x 12+/- .010
01110.0215 x 20+/- .004
01120.03215 x 20+/- .005
01130.06215 x 20+/- .005
01140.09315 x 20+/- .008
01150.12515 x 20+/- .010
01160.0217.8 x 20.5+/- .005
01170.03217.8 x 20.5+/- .005
01180.06217.8 x 20.5+/- .005
01190.09317.8 x 20.5+/- .008
01200.12517.8 x 20.5+/- .010
01210.02710 x 10+/- .004
01220.0310 x 10+/- .004
01230.0410 x 10+/- .004
01240.04710 x 10+/- .004
01250.0610 x 10+/- .005
01260.02712 x 12+/- .004
01270.0312 x 12+/- .004
01280.0412 x 12+/- .004
01290.04712 x 12+/- .004
01300.0612 x 12+/- .005
01310.02715 x 20+/- .004
01320.0315 x 20+/- .004
01330.0415 x 20+/- .005
01340.04715 x 20+/- .005
01350.0615 x 20+/- .005
01360.02717.8 x 20.5+/- .005
01370.0317.8 x 20.5+/- .005
01380.0417.8 x 20.5+/- .005
01390.04717.8 x 20.5+/- .005
01400.0617.8 x 20.5+/- .005
01410.0210 x 20+/- .004
01420.02710 x 20+/- .004
01430.0310 x 20+/- .004
01440.03210 x 20+/- .005
01450.0410 x 20+/- .005
01460.04710 x 20+/- .005
01470.0610 x 20+/- .005
01480.06210 x 20+/- .005
01490.09310 x 20+/- .008
01500.12510 x 20+/- .010
01510.0212 x 18+/- .004
01520.02712 x 18+/- .004
01530.0312 x 18+/- .004
01540.03212 x 18+/- .005
01550.0412 x 18+/- .005
01560.04712 x 18+/- .005
01570.0612 x 18+/- .005
01580.06212 x 18+/- .005
01590.09312 x 18+/- .008
01600.12512 x 18+/- .010
MIL-DTL-83528F
TABLE I. Characteristics.
Item No.InspectionUnitsToleranceMaterial type
EFHKLM
1.Operating temperature range°CN/A-55-65-55-45-55-55
+160+160+160+125+125+160
2.Specific gravitySp gr 23/23°C±13%3.54.04.03.54.01.9
3.HardnessShore A units±7657580857565
4.Compression/ deflectionPercentMin2.53.52.52.53.53.5
5.Tensile strengthPounds per square inchMin300250400400200200
6.ElongationPercentMin20010090100100100
Max500300290300300300
7.Compression setPercentMax45.060.060.035.032.030.0
8.Tear strengthPounds per inchMin504060403030
9.Volume resistivity (asOhm-cmMax0.0020.0020.0050.0050.0050.006
10.Shielding effectivenessdBMin110110110110100100
11.Electrical stability
during
DuringOhm-cmMax0.0100.0100.0060.0100.0100.009
After0.0020.0020.0050.0050.0050.006
12.Electrical stability afterOhm-cmMax0.0100.0100.0060.0100.0100.009
13.Low temperatur
e flex
TR10°CMax-55-65-55-45-55-55
TR70-40-40-40-35-55-55
14.Volume resistivity (afterOhm-cmMax0.0100.0100.0080.0100.0100.015
15.Volume resistivity afterOhm-cmMax0.0100.0100.0080.0100.0100.015
16.Fluid immersion 3/ 4/------N/SSURN/SN/SN/SN/S
1/ Tolerance on material G only is ±0.75 sp gr 23/23°C.
2/ 0.9 kA per linear inch of perimeter.
3/ N/S = Not survivable; SUR = Survivable.
4/ Maximum volume swell of 25 percent and maximum change in hardness of 15 shore A units.